|
Post by landbarge on Sept 16, 2020 8:42:14 GMT -8
For years as a kid growing up my mother warned me that if I didn't straighten up I'd wind up here. I've owned various Senior Jeeps (SJ's), many Eagles and 2 Ambassadors. The 69 was a "what can it do" toy. Got it down to a few runs in the 12.40's then had to dry dock it due to a thing called that's life. Now it's since been replaced with a clean 70 4 door cruiser. Stock 360 auto. Replaced the west coast dry rotted interior, replaced the rear suspension with tubular arms, coils pulled from a Machine and sway bar along with 3.54's and the early locker. Front is new coils and urethane bushings, added 4 wheel disc and hydroboost running on the Eaton pump. Steering box is from a 98 ZJ. Dropped in a tilt column to kick back in 70's luxury with the am/fm/ bluetooth refitted vertical brick radio. Decided that highway and no OD aren't fun so to make it interesting, I picked up Mustang T5. This just took a hard stop at the road closed sign trying to find a flat crank flywheel that isn't a 500 buck Centerforce billet. Oh well, I should get back to roasting my chestnuts over an open flame.
|
|
|
Post by spud on Sept 16, 2020 8:47:46 GMT -8
Lol. Welcome to the hideout landbarge. I think you found a good hangout just a smaller crowd. What cid you lookin for. I have a couple. Sc397 probably has a wider selection
|
|
|
Post by Captain Awesome on Sept 16, 2020 9:57:32 GMT -8
PoorMansMachine?
Welcome.
|
|
|
Post by sc397 on Sept 16, 2020 10:03:18 GMT -8
I only have a couple of spare 390 flywheels that I am hanging on to and zero early 360/304 flywheels. I may have inspired landbarge to join up on here... He has the right mental aptitude for it. LOL!
|
|
|
Post by landbarge on Sept 16, 2020 10:35:17 GMT -8
I may just have to break down and dust off the router. I've got plywood and I should have enough toggle bolts for the flex plate.
|
|
|
Post by 69Rebel on Sept 16, 2020 11:31:02 GMT -8
Welcome to the board!
|
|
|
Post by spud on Sept 16, 2020 12:46:34 GMT -8
Poormans machine would never kid around like that. He is an uptite dude.
|
|
|
Post by 67roguexcode on Sept 16, 2020 14:00:54 GMT -8
I only have a couple of spare 390 flywheels that I am hanging on to and zero early 360/304 flywheels. I may have inspired landbarge to join up on here... He has the right mental aptitude for it. LOL! ...you getting a commission?
|
|
|
Post by sc397 on Sept 16, 2020 14:45:41 GMT -8
I wish.
|
|
|
Post by sc397 on Apr 12, 2022 6:51:58 GMT -8
Well Landbarge has graduated to the next level Misfits of the Hideout.. LOL! He has Trader afraid of him and Overlords are erasing his posts on the other forum. He is doomed. PM from Trader... "FYI www.ebay.com/itm/190884990014There are others also if your still looking. I'd post but Heavy may just buy them just for expense of a laugh at others." I didn't respond to this but it did sound like a good idea to me. LOL!
|
|
|
Post by landbarge on Apr 12, 2022 7:00:11 GMT -8
Are they copper plated to match the rods?
|
|
|
Post by sc397 on Apr 12, 2022 7:03:14 GMT -8
Just make sure that you don't install them to the chevy specs. for Christ sake.
|
|
|
Post by n2ojoe on Apr 12, 2022 7:04:47 GMT -8
Well Landbarge has graduated to the next level Misfits of the Hideout.. LOL! He has Trader afraid of him and Overlords are erasing his posts on the other forum. He is doomed. PM from Trader... "FYI www.ebay.com/itm/190884990014There are others also if your still looking. I'd post but Heavy may just buy them just for expense of a laugh at others." I didn't respond to this but it did sound like a good idea to me. LOL! OH! So you're all buddy-buddy with Vader now? 😜
|
|
|
Post by sc397 on Apr 12, 2022 7:08:13 GMT -8
Yep I am the Pitcher and he is the Catcher.
|
|
|
Post by n2ojoe on Apr 12, 2022 7:17:34 GMT -8
LOL!
|
|