|
Post by sc397 on Sept 23, 2021 12:19:29 GMT -8
I have checked with these companies and none have cores to grind a Hydraulic Roller cam for me. Comp Howards Jones Lunati Isky Crower
Does anyone have any other suggestions?
|
|
acm
Cool Froods
Posts: 304
|
Post by acm on Sept 23, 2021 13:11:14 GMT -8
I heard Comp just received cores for the HR's. Might want to call them back.
|
|
|
Post by sc397 on Sept 23, 2021 13:25:47 GMT -8
We literally called them yesterday but we can try again. Thanks!
|
|
|
Post by 69Rebel on Sept 23, 2021 14:02:09 GMT -8
Schneider?
|
|
|
Post by spud on Sept 23, 2021 16:01:25 GMT -8
Chet herbert has some good profiles. I dunno what happened to crane.
|
|
|
Post by sc397 on Sept 23, 2021 18:04:28 GMT -8
Crane is no longer in business.
|
|
|
Post by spud on Sept 23, 2021 20:23:18 GMT -8
Sig erson cams, (as parented by PBM) also has a broad selection of amc hydraulic rollers, and i bet they have something, since no gaymcer alive would dare use a cam that good. I Love all my sig erson cams. Also dont forget bullet cams. They may have some
|
|
|
Post by 69Rebel on Sept 23, 2021 20:32:14 GMT -8
I dislike that this forum doesn't number the posts. Rick, did you see post #4?
|
|
|
Post by sc397 on Sept 24, 2021 3:53:32 GMT -8
|
|
acm
Cool Froods
Posts: 304
|
Post by acm on Sept 24, 2021 5:49:43 GMT -8
Rick, I was talking to John R Tuesday (I think) and he mentioned he had just ordered 4 custom grinds from Comp and that everyone else was still out of cores. Now that Edelbrock owns Comp, their service will go to shit too! Know that doesn't help you much, but there's hope some of this stuff is beginning to get restocked. Also, for lifters, morellifters.com/productsAMC 304-401 cu in Hyd Roller Lifters Set# Pair# BodyD RollD Description 6076 6075 0.903 0.700 AMC .903D T/B STREET PERF HYD ROLLER
|
|
|
Post by spud on Sept 24, 2021 9:05:54 GMT -8
I know it aint about lifters, but the morels are 903’s all 903’s are oil pressure losers. Also schneider is marketing some 903’s i think they may be morel. Only 904 i know of is johnson, and they have no blanks to build an amc lifter. Really Good hyd roller amc lifters are not out there as far as i can find. The morel and howards are 903, but pretty good and very affordable. You can run a 903 but you better pay close attention to lifter bore size and all other points of oil pressure loss in the engine need minimized. Or get the block bushed for 903’s which is a waste of a couple thousand bux. Crane, lunati, gaterman, howards, schneider, morel , comp, so called amc hydraulic roller lifters all .903 diameter( mopar size) lifters.
|
|