|
Post by Captain Awesome on Dec 12, 2017 18:54:50 GMT -8
Put an AMC in one of your Corvettes, Reb. Then you'll be a God over at gAyMC. They might make you an Admin, or Mod.
|
|
|
Post by 69Rebel on Dec 12, 2017 20:59:18 GMT -8
Yeah. I'd probably get death threats if I went the other way 'round and put a 454 in my Rebel. LOL.
|
|
|
Post by Captain Awesome on Dec 12, 2017 22:03:50 GMT -8
For sure. You should do it. man, they'd be all over your nuts. You could have more worshipers than lil danny.
|
|
|
Post by javtwotone on Dec 13, 2017 10:09:21 GMT -8
When I put a 360 in a Jag XJ6, I needed some small items from "johns Kitties that run", or something like that, anyway he sold SBC conversion kits for XJ6 and XKE Jaguars. He didn't sell parts individually but when I told him what I was doing, he thought it was cool and sold me what I needed...
|
|
|
Post by spud on Dec 13, 2017 10:22:26 GMT -8
Well you should have an ls power train ready to drop in just in case
|
|
|
Post by 69Rebel on Dec 13, 2017 19:38:08 GMT -8
I do already have a 454 for the 'vette. However, sourcing the flywheel, bell housing, and Muncie 4spd could get spendy. It would be gay to put any automatic in it, whether behind the 454 or an LS. An LS7/5or6spd would be pretty awesome.
|
|
|
Post by Captain Awesome on Dec 13, 2017 20:56:23 GMT -8
Have any gAyMC 4 spd parts laying around in your pile o parts?
|
|
|
Post by 69Rebel on Dec 14, 2017 16:37:00 GMT -8
Just a pair of shitty stock bellhousings, a broken T-5, and a couple of cast iron flywheels.
|
|
|
Post by Captain Awesome on Dec 14, 2017 19:36:02 GMT -8
That's a start.
|
|
|
Post by 69Rebel on Dec 14, 2017 21:26:55 GMT -8
I guess if all yer gonna do is haul lawn chairs to car shows, cast iron flywheels and aluminum bell housings are probably good enough.
|
|
|
Post by spud on Dec 15, 2017 5:26:03 GMT -8
Have any gAyMC 4 spd parts laying around in your pile o parts? They are usually parts even if they LOOK like a transmission in my experience. I have some 2.23 low CLOSE ratio parts. The main shafts are failure prone. I have a supplier of new parts, but not MAJOR parts...
|
|
|
Post by Captain Awesome on Dec 15, 2017 7:23:15 GMT -8
I guess if all yer gonna do is haul lawn chairs to car shows, cast iron flywheels and aluminum bell housings are probably good enough. Exactly, Reb. It's just to make the gAyMCers droll. All they do is talk about doing it. You actually do it, you're a God among men, or would that be mice?
|
|
|
Post by 69Rebel on Dec 15, 2017 8:53:24 GMT -8
I should tear down that T-5 and see what it looks like inside.
|
|
|
Post by lenniamc on Sept 10, 2018 13:21:44 GMT -8
From the sand drags past weekend 1st place in the Jeep class
Not all the passes the Jeep made but some of them
|
|
|
Post by sc397 on Sept 10, 2018 14:10:18 GMT -8
Congratulations! Thanks for posting up the video!
|
|