|
Post by fleetfox on Oct 14, 2019 19:42:47 GMT -8
Getting ready to join a 360 to a TH400 I need to know the bolt sizes to fill all the holes. So far I figure i need 4 to 6 3/8 x 16 X 1.5", what else? Anyone done one lately or can remember off the top of their heads? TSM just says "replace bolts."...
Fleet Fox
|
|
|
Post by sc397 on Oct 15, 2019 3:25:36 GMT -8
This is for the old Borg Warner transmission but I think that they are the same for the TH400. The 4 top ones are 3/8" x 2 1/8" long. The bottom two are 7/16" x 2 3/4" long
|
|
|
Post by fleetfox on Oct 20, 2019 21:27:47 GMT -8
Thank you Rick, I brought a few different lengths 3/8" and the 2" fit good for the th400. The 7/16" I concur on length as well for the TH400.
Fleet Fox
|
|