|
Rivets
Nov 8, 2023 19:04:15 GMT -8
Post by Captain Awesome on Nov 8, 2023 19:04:15 GMT -8
|
|
|
Post by 69Rebel on Nov 8, 2023 19:28:14 GMT -8
Just another day of way over thinking a simple task.
|
|
|
Post by landbarge on Nov 9, 2023 5:24:38 GMT -8
16d nails and hammer the ends over.
|
|
acm
Cool Froods
Posts: 310
Member is Online
|
Post by acm on Nov 9, 2023 5:45:46 GMT -8
But what hammer do you use? Tried a roofing one and it just mars up the aluminum?
|
|
|
Rivets
Nov 9, 2023 6:55:38 GMT -8
Post by landbarge on Nov 9, 2023 6:55:38 GMT -8
Have to use the round end.if you use the flat side, then you need to hood the end of the nail with your thumb
|
|
acm
Cool Froods
Posts: 310
Member is Online
|
Post by acm on Nov 9, 2023 7:43:54 GMT -8
I used the extra timing chain that I keep with me at all times to shield my thumb...
It's a trick I learned on the amcforum!
|
|
|
Post by spud on Nov 9, 2023 8:02:17 GMT -8
Better wear your hardhat those timing chains are flying around everywhere.
|
|
|
Post by landbarge on Nov 9, 2023 9:19:28 GMT -8
I like living on the edge so I don't carry extra timing sets.
|
|
acm
Cool Froods
Posts: 310
Member is Online
|
Rivets
Nov 9, 2023 9:55:47 GMT -8
Post by acm on Nov 9, 2023 9:55:47 GMT -8
You should... Don't have to worry about it rattling in the glove box either. Just use half a tube of Right Stuff to glue the timing chain to the glove box until you're ready to use.
Forum wisdom is grand!
|
|
|
Post by spud on Nov 9, 2023 10:56:52 GMT -8
Bulltear should create a double double timing chain and cover. Or better yet a rubber band cam drive like jesel. It would sell like mad. Of course he would never ship them but ya cant expect everything. Its just the price you pay right
|
|