|
Post by in68jav on Jun 12, 2013 17:54:37 GMT -8
|
|
|
Post by sc397 on Jun 12, 2013 18:53:41 GMT -8
3233344 = '79 to '84 Jeep 360 I don't know what the-2 means. You should be able to find a date code on them too. I think those heads push 60 to 65cc. 3195528 = 360 block. They all have that casting number on them. Does it have the 2 additional core plugs in the rear, one each side of the cam plug?
|
|
|
Post by turdbrownnash on Jun 12, 2013 19:09:59 GMT -8
Gotta love the shift point on the Tach LOL!
|
|
|
Post by in68jav on Jun 13, 2013 4:12:06 GMT -8
Oh yeah, we all know the 232 is a TORQUE monster, with the right gears I'm sure I'd be doing 80 by the 1-2 shift, lol.
|
|
|
Post by 69Rebel on Jun 13, 2013 20:12:06 GMT -8
That looks like a good start. Are ya' sure ya' don't want to pay Forest $2550 for a set of heads guaranteed to put your 232 deep into the 17s? :-)
|
|
|
Post by in68jav on Sept 26, 2018 12:04:10 GMT -8
Believe it or not, this build is actually going to happen. A lot has changed over the last 5 years, and so have the plans for this car. Time has not been kind even though it was stored "indoors", my barn is kinda rough. Anyway, starting to pull it apart, get rid of all the crusty rusty nasty mess, and its getting an ls swap and a 6spd manual. Some pics...
|
|
|
Post by in68jav on Jan 17, 2019 17:53:33 GMT -8
|
|
|
Post by in68jav on Jan 17, 2019 17:56:37 GMT -8
I am almost positive that I am going to use the car I bought from amo (Andrew) as the base of this build and my original car will be the donor. Andrew's friend dropped the car off last Sunday in about the worst conditions possible, especially since all 4 wheels were locked up!
|
|
|
Post by in68jav on Jan 24, 2019 5:55:18 GMT -8
Finally got the poor thing drug into the garage! Had to get all 4 brake drums off and remove the shoes just to get it to roll. All done in the rain of course. Even after all that I had to push it in the last 10ft or so, mangling the lower rad support in the process. Good news is the other car has a nice one, since I think I'm going to start with this body and use the other one as a parts donor!
|
|