|
Post by Captain Awesome on Aug 17, 2022 6:44:47 GMT -8
|
|
|
Post by spud on Aug 17, 2022 8:08:33 GMT -8
Looks pretty decent to me. Some light work and plates and its ready to roll. The price just sounds Kinda steep but its blow biden’s world and 7500 is nothing much.
|
|
|
Post by amxdreamer on Aug 17, 2022 8:09:44 GMT -8
At least he rolled it off the trailer for pictures!
|
|
|
Post by spud on Aug 17, 2022 8:11:51 GMT -8
Yeah its got that 401 to suck you dry but you can sell it for 5000 and slamm a 304 or 360 in it and roll on
|
|
|
Post by spud on Aug 17, 2022 8:15:51 GMT -8
Oh shit i just saw the gravel in the interior shot. No floor no rockers its half a car. All it needs is everything below the door level. You do get a 7500 parts car.
|
|
|
Post by Captain Awesome on Aug 17, 2022 10:05:10 GMT -8
Needs $20,000 worth of body work just to make it a piece of shit.
Then after you do they typical AMC Forum rebuild on the engine, 3 times, another 20k there. Lunched Cams, Dizzy gears, bearings at Chebby clearances. Then the heads crack.
|
|
|
Post by 69Rebel on Aug 17, 2022 10:27:00 GMT -8
It's exactly what I need. If only it were realistically priced, and not practically located on the moon.
|
|
|
Post by spud on Aug 17, 2022 16:08:34 GMT -8
What you have the lower half? Why not get a whole one and save ten years of work
|
|
|
Post by 69Rebel on Aug 17, 2022 21:21:28 GMT -8
I have a relatively solid Jav/AMX, with a title, that needs to be de-Barted. That car has the parts I need, all of them, which fortunately, isn't any of the sheet metal.
|
|
|
Post by Captain Awesome on Aug 18, 2022 9:03:03 GMT -8
Speaking of Bart, I haven't heard any news about his Gremlin. He's paying some toothless Redneck to do the bodywork in a 24x24 garage, it's been there for like 2 years. That Car is rust free. Should take one guy one week max to have it completed. We used to do total Rust Buckets in one week. Weld or Tiger Hair patches, tons of Pink and red fllier, paint, and buff. 5 days. That's rotted 1/4s, doors, fenders, trunk lids, hoods and roofs.... Talk about busting ass.
|
|
|
Post by spud on Aug 18, 2022 9:39:52 GMT -8
Well there ya go. If it was rust free, just let a flake and butcher shop have it, sand it bare and leave its open wounds to florida for a couple years. Problem solved.
|
|
|
Post by Captain Awesome on Aug 18, 2022 10:57:40 GMT -8
Shit is, if he went out into the garage and sanded down 1/2 of a panel a day, his car would have been finished 23 years ago.
|
|
|
Post by spud on Aug 18, 2022 12:19:14 GMT -8
He aint that guy i guess
|
|
|
Post by amxdreamer on Aug 18, 2022 16:19:34 GMT -8
Nope...not everyone has the drive or ability to do everything.
|
|