|
Post by sc397 on May 10, 2024 2:22:40 GMT -8
|
|
|
Post by sc397 on May 9, 2024 8:09:59 GMT -8
The Vice Grip shifter qualifies for Extreme Farmguy Technology...
|
|
|
Post by sc397 on May 7, 2024 4:27:05 GMT -8
You mean my valuable collector Items? Sold off some of it, moved the AMC Wheelhorse inside and the trailers are parked in front of the original part of the shop until the barn is finished.
|
|
|
Post by sc397 on May 6, 2024 16:40:39 GMT -8
Yea we are worried about that as well. The wind was gusting at about 20/25 mph today. The wire is tied down to rebar stakes hammered into the ground. My concrete guy is the same age as me and has a sweet AAR Cuda. The guy in the middle has a '74 Javelin and a Machine.
|
|
|
Post by sc397 on May 6, 2024 15:58:33 GMT -8
I still have to run a air line and a electric line over to my welder but getting there... Click on it to see a video. IMG_8580 by Rick Jones, on Flickr Since I am almost done, I may as well put up another building to house my Trailers and Tractors. This will be a 36' wide by 34' deep storage shed. My concrete guy got the sod pealed and sand put in before it rained yesterday. Today they trenched a small footer and got all the framing, plastic and wire in. We hope to pour concrete in the morning. IMG_8578 by Rick Jones, on Flickr IMG_8577 by Rick Jones, on Flickr
|
|
|
Post by sc397 on May 6, 2024 15:26:11 GMT -8
I got a ride in it today. Holy shitballs Batman! I didn't know that bias ply tires could gab like that. Awesome.. Click on it to hear it run. IMG_8579 by Rick Jones, on Flickr
|
|
|
Post by sc397 on May 3, 2024 3:39:53 GMT -8
Like an idiot, I agreed to display the silver SC/360 at the EyesOn Design at Ford House in Grosse Point Shores MI. on Father's Day. This would be fine if I had the car anywhere near drivable... So now I have basically 5 weeks to finish it and get it ready for the show. What could possibly go wrong... My stress level is all jacked up and I'm starting to lose sleep over it. Strange that when I an trying to sleep my nightmares are all about the stress at work. But wait, I am retired, why do I keep dreaming about work... Those sonsabitches! OK, enough whining. I just have to get it done and hopefully my friends will lend a hand. Hint, hint, hint... Drive Shaft Loop.. Got to have one for the Pure Stock Drags and I can't put the carpet in until it is installed. Should take a normal person like a couple hours to do. Not me, it takes just about a whole day but now it is done. IMG_8559 by Rick Jones, on Flickr
|
|
|
Post by sc397 on May 1, 2024 6:08:15 GMT -8
Soooo, Who all is going to this event??
|
|
|
1988 GW
Apr 29, 2024 16:53:29 GMT -8
Post by sc397 on Apr 29, 2024 16:53:29 GMT -8
|
|
|
Post by sc397 on Apr 28, 2024 10:43:55 GMT -8
Lens and housings complete?
|
|
|
Post by sc397 on Apr 28, 2024 10:27:17 GMT -8
is this the list of know SC still around? No, there are a few on the list that were scrapped if I remember right. My computer crashed after I made the original spread sheet so I need to take the hard copy and retype the info in again.
|
|
|
Post by sc397 on Apr 27, 2024 8:03:47 GMT -8
You won't sell thousands of them but I would buy a few.. I am pretty sure that Tom told me the American Auto Wire harness will be utilizing the standard American Auto Wire fuse box and connectors but yours will obviously work with the M&H harness.
|
|
|
Post by sc397 on Apr 27, 2024 3:32:24 GMT -8
Is Tom Jettie working on something similar for American Autowire? Maybe he is working a new harness for early Javelin and AMX but using their current fuse box.
|
|
|
Post by sc397 on Apr 26, 2024 16:23:21 GMT -8
Sold my big fat slicks and all 5 flip out windows for the late Hornet/Concord Hatchback. Bought some garage art so yea, another successful trip.
|
|
|
Post by sc397 on Apr 26, 2024 11:32:57 GMT -8
|
|