|
Post by sc397 on Dec 12, 2022 0:39:16 GMT -8
I am sure you could but you will have to check with the other guys who own them.
|
|
|
Post by landbarge on Dec 12, 2022 4:55:43 GMT -8
I've seen these collections go one of two ways. Estate sale so far he family can finally clear the shit out.
Family just calls the scrap hauler to empty out the shop since they never had any interest in the shit that hubby or dad accumulated over the last 30 years.
|
|
|
Post by Captain Awesome on Dec 12, 2022 9:21:35 GMT -8
If all the Factory Intake were aluminum, it'd never buy aftermarket. My only gripe with the Factory piece is it's weight. I think it's a pretty good piece otherwise.
|
|
|
Post by Captain Awesome on Dec 12, 2022 10:26:02 GMT -8
What's this intake weigh?
|
|
|
Post by landbarge on Dec 12, 2022 10:36:11 GMT -8
That was my only issue. Weight. i couldn't give 2 shits about that elusive extra 2 horsepower. I know,coming from a guy with a 4 door sedan
|
|
|
Post by Captain Awesome on Dec 12, 2022 10:57:04 GMT -8
It was 53 lbs from my Stock 70 390 Intake to my Performer. Your car is better balanced now, when rolling up to a sharp bend in the road and closer to getting better MPG. The weight helps with a regular driver, let alone a racer...
|
|
|
Post by landbarge on Dec 12, 2022 11:13:01 GMT -8
I never weighed it, but when I ran the blue car, I went through the trouble of making my own fiberglass front bumper. Used the backside of an OE bumper for the mold.
|
|
|
Post by Captain Awesome on Dec 14, 2022 11:42:58 GMT -8
I lied/had it wrong.... I found my old post when I weighed my Intakes.
Eddy Performer = 16 pds 3195532C AMC 4bbl = 53pds 37pds
|
|